USBConnect Mercury

http://docs.google.com/Doc?id=d9khzpw_0w4m774dd

1. Update the file /usr/share/hal/fdi/information/10freedesktop/10-modem.fdi by adding the following lines at the top of the section marked with the "" as shown below:
   
• Before:

IS-707-A

• After (add the highlighted lines):

GSM-07.07
GSM-07.05








IS-707-A

2. Restart hal using the following command:

sudo /etc/init.d/hal restart

3. Insert the Sierra Wireless USBConnect Mercury modem into a USB port of the machine. NetworkManager should prompt you for modem configuration in a few seconds.